Embedding Accessories
Electron Microscopy Sciences Embedding Mold, Dykstra
EMS Embedding Mold is a new mold designed with Michael J. Dykstra Ph.D. from North Carolina State University Department of Veterinary Medicine. This Mold produces blocks of the best dimension to be held securely by Reichert/Leica Ultracut stepped microtome chucks. There are 24 cavities and the depth of each cavity is 4 mm which will prevent breakage of the blocks during razor blade trimming. Mold Measurements: 3 3/8" x 3" (85 x 77 mm. Cavity Measurements: 15 mmx 7 mm x 4 mm deep
Electron Microscopy Sciences Flat Embedding Mold 3 mm with Cocoon Box
No more stickiness with new storage boxes. Most resins are no longer a challenge to flat embed when used in combination with the Cocoon box. The system withstands temperatures up to 70 Degrees C, and our flat embedding of many resins is made easier.
Electron Microscopy Sciences EMS Molded Flat Embedding Mold
Molds are injected molded polyethylene that is resistant to most embedding materials and will easily peeled-off the blocks. Mold fits perfectly inside the cocoon box BE8 (64300-8). These molds are reusable. Each cavity measures 12mm(L) x 5mm(W) x 3.5mm Deep. Overall mold measures: 94 x 56 x 14mm.
Electron Microscopy Sciences For use with the Tissue-Tek CRYO3 Microtome/Cryostat Cryo 2000™, these plastic Cryomold specimen holders have round shapes and a tab for easy handling.
For use with the Tissue-Tek CRYO3 Microtome/Cryostat Cryo 2000™, these plastic Cryomold specimen holders have round shapes and a tab for easy handling.
Electron Microscopy Sciences Crystalbond™ 590 Adhesive Stick, Brown 225 GR
A temporary adhesive. These wash away adhesives are used as a temporary bond for holding delicate crystals, metallurgical specimens, glass components, and ceramic substrates for dicing, slicing, drilling and polishing. These materials adhere readily to metals, glass, ceramic and then can be washed after machining away using various solvents. For precise high purity work offers maximum adhesion to subminiature parts.
Color: Brown
Softening: 257°F (125°C)
Flow point: 302°F (150°C)
Viscosity: 9,000 cps
Electron Microscopy Sciences Cold Mounting Disposable Mold Cups, 1.5"
Mounting cups for cold mounting/embedding. Polyethylene, one part molds. Closed one end. Red.
Size: 1½"
Polysciences, Inc. PolyPress™ Tissue Embedding Tampers (10mm x10mm)
This item has a minimum qty of 2 per supplier requirements.
Andwin Scientific INTERMED CRYMOLD 15/15/5 12/CS
The Cryomold molds produce uniformly shaped, flat-surface specimen block when used with O.C.T. (optimum cutting temperature) compound, which is sold separately, for frozen sectioning. This can fit into Cryobar freezing wells of the Tissue Tek II microtome/cryostat with the use of an adapter. This product measures 15 mm x 15 mm x 5 mm. It is sold in a case of 1200.
Electron Microscopy Sciences Embedding Ring, White
Molded from the highest quality plastic, our Embedding Rings fit most base molds. The large writing surface further eases identification and handling. The base measures 1 5/8" x 1 1/8" and the ring measures 1" x 1" (25 x 25 mm).
Electron Microscopy Sciences T-Sue™ Precast Paraffin Block, 4 mm
Precast T-Sue Microarray paraffin blocks are used to construct a tissue array block in minutes by simply punching the donor tissue cores and inserting into a pre-made paraffin recipient block. It is an easy, convenient, and low cost method for constructing paraffin tissue microarrays. The blocks are made of paraffin and the cassettes are made of acetal. The cassette is permanently bonded to the block and has consistent core diameters. It is ready to accept cores from the donor block.
Kit includes 6 Precast T-Sue Paraffin blocks and two punch needles with stylet.
Size: 4 mm
Capacity: 15 cores
Electron Microscopy Sciences T-Sue™ Microarray Mold Kit, 3 mm
T-Sue array molds are specifically designed to be simple, easy to use and inexpensive. The tissues can be analyzed in consistent conditions enhancing the efficiency of the research. Allow you to perform TMAs more quickly with excellent results. By using array molds, you can process up to 170 specimens onto one single slide in very little time.
Made of silicone, these molds can withstand temperatures between -100 deg C to +250 deg C and be reused hundreds of times without losing their flexibility.
Each kit includes one T-Sue array mold and four punch needles with stylet.
Size: 3 mm
Capacity: 36 cores